Spesifikasi :
Service : Air and non-combustible, compatible gases. (Natural Gas option available.)
Note : May be used with hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Wetted Materials : Consult factory.
Housing : Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion
Test.Accuracy : 2% of FS (3% on -0, -100PA, -125PA, -10MM and 4% on -00, -60PA, -6MM ranges), throughout range at 70F (21.1C).
Pressure Limits : -20 in Hg. to 15 psig. (-0.677 bar to 1.034 bar); MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).
Overpressure : Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection note on Catalog page.
Temperature Limits : 20 to 140F (-6.67 to 60C). -20F (-28C) with low temperature option.
Size: 4" (101.6 mm) diameter dial face.
Mounting Orientation : Diaphragm in vertical position. Consult factory for other position orien
Service : Air and non-combustible, compatible gases. (Natural Gas option available.)
Note : May be used with hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Wetted Materials : Consult factory.
Housing : Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion
Test.Accuracy : 2% of FS (3% on -0, -100PA, -125PA, -10MM and 4% on -00, -60PA, -6MM ranges), throughout range at 70F (21.1C).
Pressure Limits : -20 in Hg. to 15 psig. (-0.677 bar to 1.034 bar); MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).
Overpressure : Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection note on Catalog page.
Temperature Limits : 20 to 140F (-6.67 to 60C). -20F (-28C) with low temperature option.
Size: 4" (101.6 mm) diameter dial face.
Mounting Orientation : Diaphragm in vertical position. Consult factory for other position orien
0 Post a Comment:
Posting Komentar